Pad Media




[+] Larger

Dustlok 2 Ply Pad and Roll Media

[ ]

Dual-Ply Dustlok Media Fiberbond Dual-Ply Dustlok provides the performance of extended surface filters in a unique media design. Distinct Dual Density provides high-dust holding- long service life. The coarse open structure of the white, air entering layer allows true depth loading. The orange, dense, downstream layer effectively stops and traps finer particles. Dustlok Adhesive is a Fiberbond proprietary chemical formulation that uniformly coats the fibers in the downstream layer during the formation of the media. Dustlok absorbs dust particles into the adhesive, trapping them on the surface of individual fibers. Dustlok will not dry out or migrate. Operating temperatures up to 200°F do not affect performance. Spor-Ax Antimicrobial is a biocide that effectively controls growth of mold, mildew, algae and fungi on filters. Fiberbond filters with Spor-Ax do not support microbial growth. Spor-Ax will not off gas, migrate or leach into the airstream.



Spec Sheet
Sizes | Buy


[+] Larger

Polyester Pad

[ ]

Fiberbond ~ Polyester Media ~ Depth Loading: The airlaid principle of Fiberbond media is to randomly disperse fibers in all directions throughout the web. This forms a uniform media of high strength and durability. A high volume of contaminants can be trapped within the complete depth of fiber. ~ FP Series of Tackified Media: The FP 50, FP 100, and FP 200 media have a uniform coating of tackifier on all fibers in the blue air leaving side of the media. Dirt trapped in the media is held tight by the tackifier. The tackifier cannot migrate since it is part of the fiber spray bonding process during manufacturing of the filter media.



Spec Sheet
Sizes | Buy


[+] Larger

Polyester Roll

[ ]

Fiberbond ~ Polyester Media ~ Depth Loading: The airlaid principle of Fiberbond media is to randomly disperse fibers in all directions throughout the web. This forms a uniform media of high strength and durability. A high volume of contaminants can be trapped within the complete depth of fiber. ~ FP Series of Tackified Media: The FP 50, FP 100, and FP 200 media have a uniform coating of tackifier on all fibers in the blue air leaving side of the media. Dirt trapped in the media is held tight by the tackifier. The tackifier cannot migrate since it is part of the fiber spray bonding process during manufacturing of the filter media.



Spec Sheet
Sizes | Buy


[+] Larger

Fiberglass Pads

[ ]



Spec Sheet
Sizes | Buy


[+] Larger

Kwik Cuts

[ ]

Kwik-Cuts ~ These are 15”x24” pads of filter media that can be easily cut to fit any window or wall counted room air conditioner. They are offered in the same spun glass, foam and aluminum media described above. Also offered are 1/2” Permaire and plastic-backed foam.



Spec Sheet
Sizes | Buy


[+] Larger

Washable Foam

[ ]

Service Rolls ~ air filtration media are manufactured in selected widths, prepared in roll lengths that make manageable roll sizes. In most cases, a single cut across the roll will produce a ready-to-install filter pad. The following media are offered as service rolls: Spun Glass: This is a rigid, nominal 3/8” thick, dry spun glass. It is typically used to make rigid pads for use in room unit air conditioners. It is designed for use without a frame. Since it is untreated, it will not harm the plastic frequently used in the construction of room units. Foam: A rugged polyurethane foam that is designed for use in room unit air conditioners and in pad-holding frames. It is washable and will withstand repeated cleaning with mild soap and water. Foam service rolls are available in 1/4”, 1/2”, 1” and 2” media thicknesses. They are washable for repeat use. Aluminum: The aluminum service roll is an expanded aluminum mesh of the type used in room unit air conditioners. It is a nominal 1/4” thick dry filter media that requires the addition of a dust adhesive for effective filtration.



Spec Sheet
Sizes | Buy


[+] Larger

Hogshair Roll

[ ]

Service Rolls ~ air filtration media are manufactured in selected widths, prepared in roll lengths that make manageable roll sizes. In most cases, a single cut across the roll will produce a ready-to-install filter pad. The following media are offered as service rolls: Spun Glass: This is a rigid, nominal 3/8” thick, dry spun glass. It is typically used to make rigid pads for use in room unit air conditioners. It is designed for use without a frame. Since it is untreated, it will not harm the plastic frequently used in the construction of room units. Foam: A rugged polyurethane foam that is designed for use in room unit air conditioners and in pad-holding frames. It is washable and will withstand repeated cleaning with mild soap and water. Foam service rolls are available in 1/4”, 1/2”, 1” and 2” media thicknesses. They are washable for repeat use. Aluminum: The aluminum service roll is an expanded aluminum mesh of the type used in room unit air conditioners. It is a nominal 1/4” thick dry filter media that requires the addition of a dust adhesive for effective filtration.



Spec Sheet
Sizes | Buy


[+] Larger

Fiberglass Service Roll

[ ]



Spec Sheet
Sizes | Buy


[+] Larger

Polyester Sleeve

[ ]



Spec Sheet
Sizes | Buy