Cleanroom Fan Filter Units




[+] Larger

SAM MicroSound ECM

[ ]

SAM MicroSound ECM GS units feature a gel channel on the upstream side of the final filter which provides a leak-free seal between the filter and the housing. Housings are fabricated from steel with a white powdercoat finish. The ECM motor blower is a 1/3 HP, motor with a forward curved blower. Units are available in 115V (60 Hz), and 277V (60 Hz). SAM MicroSound Fan Filter Units include a 99.99% efficient HEPA filter, 30% ASHRAE pleated type prefilter, seismic clip suspension points. Final filters are protected with a white epoxy diamond pattern grille and are tested according to accepted procedures as described by the Institute of Environmental Sciences (IEST) and/or ISO standards. The standard HEPA filter is 99.99% eff. and an ULPA grade 99.9995% eff. filter is available as an option. SAM MicroSound ECM fan filter units key features include: - A local potentiometer to set desired airflow. - Digital speed display. - An electronically commutated motor that is programmed to increase the speed as the load increases to maintain a constant air- flow. - Low power consumption.



Spec Sheet
Sizes | Buy


[+] Larger

SAM MicroSound

[ ]

SAM MicroSound Fan Filter Units include a 99.99% efficient HEPA fi lter, 30% ASHRAE pleated type prefilter, seismic clip suspension points, safety switch which disables the unit while servicing, and solid state variable speed control with RFI suppression, allowing the airflow to be fine tuned. Housings are fabricated from steel with a white powdercoat finish and include seismic clip suspension points. The energy effi cient N310 motor blower is a low watt backward curved impeller, single phase, permanent split capacitor type motor blower assembly with thermal overload protection. Units are available in 115 Volt (60 Hz), 208-230 Volt (50/60 Hz) and 277 Volt (60 Hz). Final filters are protected with a white epoxy diamond pattern grille and are tested according to accepted procedures as described by the Institute of Environmental Sciences (IEST) and/or ISO standards. The standard HEPA fi lter is 99.99% eff. and an ULPA grade 99.9995% eff. filter is available as an option.



Spec Sheet
Sizes | Buy


[+] Larger

SAM Haz Loc

[ ]

SAM Haz Loc (Hazardous Location) Units are ideal for supplying clean air to workstations or equipment in a location where ambient air is contaminated with chemical or other hazardous conditions. Units include a 99.99% effi cient HEPA filter,prefilter, spark resistant aluminum blower wheel and electrical parts with explosion proof ratings (AMCA Type B Construction). Housings are fabricated from steel with a white powdercoat finish. If necessary eyebolts can be field installed in the weld nuts located at all corners for suspending the unit. Units are available in 115 Volt (60 Hz), 208-230 Volt (50/60 Hz) and 277 (60 Hz), single phase and 208/460, 3 phase. HEPA or ULPA 99.9995% eff. @ 0.12 micron final filters are protected with a white epoxy diamond pattern grille and are tested according to accepted procedures as described by the Institute of Environmental Sciences (IEST) and or ISO standards.



Spec Sheet
Sizes | Buy


[+] Larger

SAMlink Control Systems

[ ]

SAMlink Control Systems are designed to control SAM units from a remote console or panel. Linked individually or in groups, an operator can increase or reduce airflow to a selected area and utilize the set back feature during off-peak hours, resulting in lower operating costs. Our exclusive state-of-the-art, reasonably priced fan filter control systems utilize our standard 115 volt and 277 volt, motor blower units without using high cost DC motors. Precise Airfl ow Control - SAM units are controlled individually or in groups, typically 1-4 units per address. - Fan speeds are set and/or adjusted from a console located outside the cleanroom without breaching the integrity of the cleanroom. Three levels of adjustment are possible: by Individual address / per Cleanroom zone / or Globally (all addresses) - The number of addresses is almost unlimited. - Room or equipment layouts with unique airflow requirements are easy to set and control.



Spec Sheet
Sizes | Buy


[+] Larger

SAM RF Reverse Flow

[ ]

Use a Reverse Flow Unit When Negative Pressure Is Required Air is pulled out of a cleanroom, clean bench, workstation or an enclosure and passes through a HEPA filter. The HEPA filter captures particles sized at 0.3 microns or larger. Clean air can be ...exhausted into the ambient area ducted into a recirculation system vented to the outside



Spec Sheet
Sizes | Buy


[+] Larger

SAM 24 MS GS

[ ]

Ideal for Pharmaceutical Companies Gel Seal Style HEPA or ULPA Filter Replaceable From Roomside SAM MicroSound GS fan fi lter units are ideal for pharmaceutical companies, manufacturers of medical devices and companies in highly regulated industries. The SAM GS units feature a gel channel on the upstream side of the final filter which provides a leakfree seal between the filter and the housing. SAM MicroSound GS units feature a HEPA or ULPA filter replaceable from roomside while the filter housing remains in place. Housings are fabricated from steel with a white powdercoat finish and include seismic clip suspension points. The energy efficient N310 motor blower is a low watt backward curved impeller, single phase, permanent split capacitor type motor blower assembly with thermal overload protection. Units are available in 115V (60 Hz), 208-230V (50/60 Hz) and 277V (60 Hz). SAM MicroSound Fan Filter Units include a 99.99% efficient HEPA fi lter, 30% ASHRAE pleated type prefilter, seismic clip suspension points, safety switch which disables the unit while servicing, and solid state variable speed control with RFI suppression, allowing the airflow to be fine tuned.



Spec Sheet
Sizes | Buy


[+] Larger

SAM MS 3S NCR Style

[ ]

SAM MS 3-S Fan Filter Units provide quiet performance and economy while delivering 90 FPM airflow velocities, perfect for most cleanroom applications. Base design includes a 99.99% effi cient HEPA filter, a prefi lter and a 3-speed switch with an off position which disables the unit while servicing. Housings are fabricated from steel with a white powdercoat finish and include seismic clip suspension points. The 1/5 HP motor blower is a forward curved direct drive motor/blower assembly with isolation mounts. Units are available in 115 Volt (60 Hz) and 277 Volt (60 Hz). Final fi lters are protected with a white epoxy diamond pattern grille and are tested according to accepted procedures as described by the Institute of Environmental Sciences (IEST) and/or ISO standards. The standard HEPA fi lter is 99.99% eff. and an ULPA grade 99.9995% eff. filter is available as an option.



Spec Sheet
Sizes | Buy


[+] Larger

Sam 44 CRF

[ ]

SAM 44 CRF Fan Filter Units feature HEPA or ULPA filters replaceable from roomside. All standard SAM 44 Fan Filter Units include two (2) 99.99% efficient HEPA filters, two (2) prefilters and seismic clip suspension points. Housings are fabricated from 20 gauge steel with white powdercoat finish and are designed to fit a nominal 4’x 4’ ceiling grid (46.5”x 46.5” standard opening). Motor blower assemblies are chosen after consulting with our sales or engineering departments and are removable from roomside. Voltages range from 115 to 277 volt single phase, 50/60hz or 208 to 480 volt, three phase. Final filters are protected with a white epoxy diamond pattern grille and are tested according to accepted procedures as described by the Institute of Environmental Sciences (IEST) and/or ISO standards. Filter options include gasket style ULPA 99.9995% or PTFE 99.999995% efficiencies and gel seal style HEPA or ULPA grade filters. Removing the polystyrene egg-crate grille with an anodized aluminum frame permits removal of the filter without removing the unit from the ceiling. Optional perforated stainless steel or aluminum grilles are available. Consult with one of our cleanroom experts in your area, or call the factory for more information.



Spec Sheet
Sizes | Buy