Cleanroom Ceiling Grid




[+] Larger

TRAX 2.2 Grid

[ ]

FEATURES AND BENEFITS: • Suspension points can be placed anywhere on the upper T-slot of the grid • Hangers below the grid can be placed anywhere by drilling a ¼” diameter hole and bolting through the grid for support with ¼” hardware • Head-Tracks to wall systems mount easily to the face of the grid with simple drill and tap type fasteners • The Trax-1 grid system is compatible with tear-drop, sealed troffer or flow-through light fixtures • Sprinkler penetrations can be installed in any cross t-section. This is factory supplied with a provision for installing a “Flexhead” sprinkler assembly. OPTONS: • Special coatings • Grid layouts, 24” x 48” and 25” x 49” • Factory applied gasket material • Add-A-Track – Gel version of System • Suspension with hang-wire • Suspension with ¼-20 threaded rod • Sprinkler assembly by “Flexhead” installed in Cross T’s TRAX-1 PARTS: • Main Runner –anodized aluminum 12’-0” • Cross Runner – anodized aluminum 46 ½” • Wall Angle – anodized aluminum 12’-0” • Intersection Clip – zinc plated • Splice Clip – zinc plated • Three-Way Clip – zinc plated • Perimeter Clip – zinc plated • Turnbuckle – 3/8-16, 6” body • Threaded Rod – RH-LH – 8” long zinc plated • Philips Pan Head Screw – ¼-20 x ½” Philips Pan Head zinc plated • Weld-nut – ¼-20 threads zinc plated • Gasket - 3/8” Thick x 3/8” Wide Closed Cell PVC Gasket – adhesive one side



Spec Sheet
Sizes | Buy